The vertical sweeping rod is set along the length direction of the frame, and the horizontal sweeping rod is perpendicular to it. 15mm dywidag tie...
What is the acceptance test for full house scaffolding? The first steel pipe fastener entering the site must have a certificate of conformity and a...
1. scaffolding screw jacks The intersection point of the upright pole, longitudinal horizontal pole, and transverse horizontal pole is the main node, and a transverse...
According to JGJ130-2011 and the general specifications for construction scaffolding. 5×5 scaffolding The height of a scaffold should not exceed 2 steps from the top...
More wonderful information has been updated on the official account in the past. scaffolding boards If you miss something and don’t get it, hurry up...
Scan the code to add WeChat for free to receive more construction materials. slab prop nut If it is helpful to you, please forward this...
This scaffold made two basic mistakes, the first being the position of the horizontal sweeping rod was reversed. shuttering prop nut .
There are two safety hazards with this cantilever scaffold. The first one is that the number of U-shaped steel pull rings at the end of...
How to inspect the diagonal braces of scaffolding? Firstly, the number of diagonal braces crossing the uprights should comply with the specifications in the table....
1) A cushion plate, 50mm x 4000mm wooden scaffold board, should be installed at the bottom of each upright pole. ringlock scaffolding system ledger end...
