It combines the collapse accidents of formwork support and scaffold in recent years, analyzes the main causes of the accidents, and interprets them one by...
Note: after the lower support rod is installed and adjusted to the stress state, the “adjusting sleeve” should be wrapped with adhesive tape in time...
1 . Basic requirements for steel cantilever scaffold erection 5 . Construction preparation 3 . Safety management requirements for scaffold operation 2 . Inspection and...
The scaffold height is more than 7 meters, whether the scaffold is tied to the building structure, and whether the scaffold is lack or not...
2) The frame system is composed of vertical main frame, horizontal load-bearing truss, frame frame and fence . A comprehensive interpretation of the technology of...
When the cantilever steel beam is more than 2.4m, it is erected by the way of “upper double pull cantilever bearing frame + additional diagonal...
Hunan Zhengwei Construction Technology Co., Ltd . The cantilever steel beam is 1.63M long (< 1.75m), and the "pull-up cantilever bearing frame" is adopted ....
[Kan Kan project] 100000 engineers and engineers have paid attention to it! .
Click the Shanghai construction site above to pay attention to us . Source: Beihai Municipal People’s government portal, Zhongxin video, construction technology, if necessary .
The small cross bar must be fixed on the longitudinal horizontal bar with right angle fasteners . 2) The vertical deviation of the vertical pole...
